Install Kali Linux via Network PXE
Booting and installing Kali via the network (PXE) may be useful from a single Computer install with no CDROM/USB , to deployments of Kali Linux in Enterprises is supporting pre-seeding of the Kali installation. Here is following Phases to install Kali Linux via Network PXE.
Setting up a PXE Server
dnsmasq is a utility used to setup server for DHCP and DNS, So We need to install dnsmasq first. Second is editing of /etc/dnsmasq.conf file. USer can do thing by using following commands.
#apt-get install dnsmasq
In dnsmasq.conf, empower DHCP, TFTP and PXE booting and set the dhcp-range to match your network. If necessary you can likewise characterize your gateway and DNS servers with the dhcp-option mandate as shown as follows:
When the editing done, save the file and start the dnsmasq. If this service take more time to install as usual then restart the service. After restarting service changes take effect automatically.
#service dnsmasq restart
Download Kali PXE Netboot Images
If you want to setup PXE network you need to run following commands
#mkdir -p /tftpboot
*// for 64 bit systems:
*// for 32 bit systems:
#tar zxpf netboot.tar.gz
Configure Target to Boot From Network
After setting up PXE server then you need to go on another machine to see what happend. and you another system will be start.
Latest posts by Vijay Kumar (see all)
- How to become Kali Linux Hacker - September 17, 2017
- 5 Inexpensive & Reliable WordPress Hosting Services For Your Blog - September 14, 2017
- Best SEO plugins for wordpress website to grow your business - September 13, 2017